Portillons double fil

Double-wire pedestrian gate 2x8/6 mm

In stock
Select Couleur
Select Hauteur
Select Longueur
From €29.90
1
Double-wire pedestrian gate 2x8/6 mm—
€29.90
1
  • 2x8/6 mm double-wire mesh infill, 50 × 200 mm mesh, matching rigid 2D panels
  • Frame in 60 × 40 × 2 mm steel profile
  • Galvanised, powder-coated steel: dual anti-corrosion protection (40–60 g Zn/m² galvanising + polyester powder coating)
  • 4 RAL colours: anthracite 7016, green 6005, white 9010, black 9005
  • 7 heights from 0.8 m to 2 m and 3 clear widths: 1 m, 1.25 m, 1.5 m

Trade or large volume? Request a project quote

Description

The 2x8/6 mm double-wire pedestrian gate provides walk-through access for your rigid fence. Its wire-mesh infill with a 50 × 200 mm mesh matches the pattern of the matching panel, for visual continuity along the entire run. The frame is built from 60 × 40 × 2 mm steel profile, galvanised (40–60 g Zn/m²) then polyester powder-coated. This dual anti-corrosion protection suits permanent outdoor installation. The gate is fitted between two posts, set in concrete or base-plate mounted. Seven heights, from 0.8 m to 2 m, and three clear widths (1 m, 1.25 m, 1.5 m) cover most configurations.

Product Information

Shipping & Returns

Technical specifications

Material
Acier galvanisé thermolaqué
Finish
Thermolaquage polyester + galvanisation 40-60 g Zn/m²
Height
0.8 m · 1 m · 1.2 m · 1.4 m · 1.6 m · 1.8 m · 2 m
Length
1 m · 1.25 m · 1.5 m
Mesh
50 × 200 mm
Wire diameter
2*8/6 mm

Installation advice

The gate is installed between two posts, set in concrete or base-plate mounted, in keeping with the post system chosen for the rigid panels. Select the gate height to match the panels for a consistent alignment.

Choose the clear width (1 m, 1.25 m or 1.5 m) according to the access required, then position the posts at the corresponding spacing before fixing.

Frequently asked questions

Which heights and widths are available?
The gate comes in 7 heights, from 0.8 m to 2 m, and in 3 clear widths: 1 m, 1.25 m and 1.5 m.
Does the gate match the rigid 2D panels?
Yes. Its 2x8/6 mm double-wire infill with a 50 × 200 mm mesh matches the rigid 2D double-wire panel, for visual continuity along the entire run.
How is the gate installed?
It is fitted between two posts, set in concrete or base-plate mounted, at the spacing matching the chosen clear width.
Which colours are offered?
Four RAL colours are available: anthracite 7016, green 6005, white 9010 and black 9005.
Is delivery provided?
Yes, the gate benefits from fast delivery throughout France.
Double-wire pedestrian gate 2x8/6 mm | Clôture Hexagone